Tektronix RFM220, Руководство пользователя

Страница: 99 / 116

Operating Basics
Device Information Tab Select the Metrics tab to display metrics for the RFM220 instrument that is
being monitored.
Figure 43: Device Information metrics display
LED Indicators
When SNMP alarms from a RFM220 instrument are sent to the
RFM220 Aggregator, the LED indicators in the Metrics pane will change
color to match the severity level of the detected error. (See page 55,
Error
indicator color codes .)
Synchronizing Alarms
If a RFM220 instrument is reset to the default settings while being monitored
by an Aggregator, you need to reapply the alarm con
fi guration settings to
synchronize the alarm LED indicators on the Metrics pane with the actual state
of the alarms. To reapply the alarm con
fi guration settings, open the Alarm
Con fi guration dialog and click Apply.
CAUTION.
If you do not reapply the alarm con fi guration settings after a
RFM220 instrument is reset to the factory default settings, the LED indicators
for some metrics will indicate an active error condition that cannot be cleared.
RFM220 User Manual 73