Tektronix RFM220, Руководство пользователя

Страница: 96 / 116

Operating Basics
Event Logs
The RFM220 Aggregator creates and stores events from monitored RFM220
instruments in log
fi les.
Log File Location The RFM220 Aggregator maintains all of the log fi les in the Application
Data folder on the PC or server where the Aggregator is installed. The path
to these
fi les are as follows:
Windows 7 systems:
C:\Users\<user ID>\AppData\Local\Tektronix\RFM220\RFM220
Aggregator\Logs
Windows XP systems:
C:\Documents and Settings\<user ID>\Local Settings\Application
Data\Tektronix\RFM220\RFM220 Aggregator\Logs
Log File Types There are two types of log fi les in the Logs directory:
Aggregator.log, which contains log entries that are related to the
Aggregator. A user will not typically need to access this
fi le.
<IP address>.log, which contains the device logs for the associated
RFM220 instrument being monitored. There will be a
fi le for each
RFM220 instrument that the Aggregator has monitored.
Log File Management Backing up the log fi les.
To prevent the loss of data, it is recommended that the
RFM220 system administrator backup the log fi les whenever the Aggregator
is stopped (for example, if the RFM220 system requires maintenance or if
there is a reason to stop the Aggregator).
CAUTION.
To prevent the loss of data after the Aggregator has been shut
down, the RFM220 system administrator needs to ensure that no log fi les are
present in the Logs folder before the Aggregator is restarted.
Saving log fi les.
To help solve a problem with your RFM220 system,
Tektronix may request a copy of your log fi les. If your logging has been
set to a low level such as Info in the Con fi guration.xml fi le (See page 22,
Con fi guring the RFM220 Aggregator .), Tektronix may request that you
change the logging to a higher level such as Debug or Verbose in order to get a
better diagnosis of the problem. Except in such support request cases, users
are advised to set the logging level to Info.
Log size control.
The size of the event logs and the length of the log entries is
controlled by the Con fi guration.xml fi le used by the RFM220 Aggregator.
70 RFM220 User Manual