Tektronix RFM220, Руководство пользователя

Страница: 64 / 116

Getting Started
Starting the RFM220
Client
The RFM220 Aggregator must already be running before a RFM220 Client
can connect to the Aggregator. Perform the following steps to start the
RFM220 Client application:
1. On the PC where you installed the application, start the RFM220 Client as
follows for the operating system on your PC or server:
Windows 7 systems. Right-click the RFM220 Client icon on your
desktop and select Run as Administrator .
Windows XP systems. Double-click the RFM220 Client icon on your
desktop.
Figure 21: Initial RFM220 Client login window
2. In the RFM220 Client Login window, enter the IP address or device name
of the PC or server hosting the RFM220 Aggregator.
NOTE. For fi rst-time operation, the Aggregator box is blank. In future
logins, the last IP address or device name that you used to connect to a
RFM220 Aggregator will be displayed.
If the Con fi guration.xml fi le has been updated since the last time you logged
on to the instrument to change the port number used by the Aggregator for
Client communications, you will need to add the new port number to the
Aggregator IP address. For example, if the IP address of the Aggregator is
128.94.1.36 and the new port number is 8001, then enter 128.94.1.36:8001
in the Aggregator box.
38 RFM220 User Manual