Tektronix RFM220, Руководство пользователя

Страница: 103 / 116

Reference
Recovering the IP Address
If you lose or cannot remember the IP address of the RFM220 instrument, use
the procedure in this section to recover the address.
Required Equipment You will need the equipment listed below to recover the IP address:
PC with an RS-232 connection
RS-232 serial cable, DB9 male to DB9 female, straight wiring (pin 2 to
pin 2, pin 3 to pin 3, etc.)
Procedure 1. Connect the RS-232 cable between the RS-232 ports on the PC and the
RFM220 instrument.
2. Power on both the PC and the RFM220 instrument.
3. From the Start menu on the PC, select All Programs > Accessories >
Communications > Hyper Terminal . This opens the HyperTerminal
window.
NOTE.
If this is the fi rst time that HyperTerminal has been opened on the
PC, a Location Information dialog box will open where you must enter your
location parameters before the HyperTerminal application will operate.
If the Location Information dialog box appears, fi ll in the location information
and then click OK .
Figure 46: Entering location information for HyperTerminal
RFM220 User Manual 77