Operating Basics
Add or Move a Marker on a Waveform.
1.
Tap
View
.
2.
Tap
Measurement Frequency Cursor
.
3.
Tap the marker readout of the marker that
you want to add or move on the spectrum
waveform. The marker readout border
darkens to indicate that it is selected.
4.
Tap the waveform where you want to add
or move the marker. The marker is placed
on the waveform and the readout shows
the signal values at the new location.
5.
Use the Parameter Entry controls to
fi
ne-tune the position of the marker on the
waveform.
38
RF Scout Quick Start User Manual
