Tektronix PWS4205, Руководство программиста

Страница: 27 / 90

Commands Listed in Alphabetical Order
Examples
*ESE 145
sets the ESER to binary 10010001, which enables the PON, EXE,
and OPC bits.
*ESE
might return the string
*ESE 186
, showing that the ESER contains the
binary value 10111010.
*ESR? (Query Only)
Returns the contents of the Standard Event Status Register (SESR). *ESR? also
clears the SESR (since reading the SESR clears it). (See page 3-1,
Status and
Events .)
Group Status
Syntax
*ESR?
Related Commands
*CLS , *OPC , *SRE ,
Returns
<NR1>
, which is a decimal representation of the contents of the Standard Event
Status Register (SESR).
Examples
*ESR?
might return the value
149
, showing that the SESR contains binary
10010101.
FETCh:CURRent[:DC]? (Query Only)
This command returns the last measured output current stored in the
communications buffer of the power supply. A new measurement is not initiated
by this command.
Group Measurement
Syntax
FETCh:CURRent[:DC]?
Related Commands MEASure:CURRent[:DC]?
Returns
<NR2>
, which gives is the measured output current in amperes.
PWS4205, PWS4305, PWS4323, PWS4602, and PWS4721 Power Supply Programmer Manual 2-15