Getting Started
10.
Push
I-set
and use the numeric keys and
Enter
button to set the current value to the maximum allowable for your current
supply. Check if the displayed current value is approximately the same value as the maximum allowable.
11.
Turn off the power supply and remove the short wire from the (+) and (-) output terminals.
Cleaning
Inspect the power supply as often as operating conditions require. To clean the exterior surface, perform the following steps:
1.
Remove loose dust on the outside of the power supply with a lint-free cloth. Use care to avoid scratching the display.
2.
Use a soft cloth dampened with water to clean the power supply. Use an aqueous solution of 75% isopropyl alcohol
for more ef
fi
cient cleaning.
CAUTION.
To avoid damage to the surface of the power supply, do not use any abrasive or chemical cleaning agents.
CAUTION.
Avoid getting moisture inside the unit during external cleaning. Use only enough cleaning solution to dampen
the cloth or swab.
6
PWS2185, PWS2323, PWS2326, and PWS2721 User Manual
Содержание PWS2185
Страница 2: ......
Страница 3: ...PWS2185 PWS2323 PWS2326 and PWS2721 Linear DC Power Supplies ZZZ User Manual xx...
Страница 6: ......
Страница 8: ...Table of Contents ii PWS2185 PWS2323 PWS2326 and PWS2721 User Manual...