manualshive.com logo in svg

Tektronix Profile Pro II, Руководство пользователя, Страница: 320 / 370

Поделиться
Скачать
Tektronix Profile Pro II Скачать руководство пользователя страница 320

Chapter 10 Using TimeDelay

320

Profile PRO Series

Launching a Project at Start-up

To automatically launch a TimeDelay project at start-up:

1. Configure and save a TimeDelay project.

2. Add the name of the TimeDelay project file to the end of the pdrstart.bat file.

Pdrstart.bat is a start-up script that is installed with the Profile software. By
adding the project name to the start-up file you ensure that TimeDelay will not
attempt to run until all Profile services have been initialized at start-up.

Copying Project Files Between Machines

Once you create a TimeDelay project file, you can copy it to any number of
machines (or open it remotely). There are several issues to consider:

• When you copy a project to and run it on a PC (rather than a Profile unit), the

project still references the original machine name. No matter which PC
launches the project, TimeDelay connects to the same machine. A better
alternative is to use

File | Import

 to import another project’s configuration

information, then save the project again to create a project file that has a
different machine name.

• When you copy a project to and run it on a Profile unit, the machine name

stored in the project does not matter (TimeDelay always connects to the local
machine). What should be considered is different machine capabilities.

Содержание Profile Pro II



















































































































































































































































































































































































Отзывы:

Нет отзывов