Tektronix MSO54, Руководство программиста

Страница: 893 / 1026

Commands listed in alphabetical order
TRIGGER:A:LOGICQUALIFICATION?
might return
:TRIGGER:A:LOGICQUALIFICATION AND
indicating the instrument will
trigger if all conditions are true.
TRIGger:A:MODe
This command sets or queries the A trigger mode. This command is equivalent to
pushing the Mode button on the front panel.
Group
Trigger
Syntax
TRIGger:A:MODe {AUTO|NORMal}
TRIGger:A:MODe?
Arguments
AUTO
generates a trigger if one is not detected within a speci fi ed time period.
NORMal
waits for a valid trigger event.
Examples
TRIGGER:A:MODE NORMAL
sets the trigger mode to normal.
TRIGGER:A:MODE?
might return
:TRIGGER:A:MODE AUTO
, indicating that
the trigger mode is auto.
TRIGger:AUXLevel
For those instruments that have an Auxiliary Input (such as an MSO58LP), this
command sets or queries the Auxiliary Input voltage level to use for an edge
trigger.
Group Trigger
Syntax
TRIGger:AUXLevel
{<NR3>|ECL|TTL}
TRIGger:AUXLevel?
Arguments
<NR3>
is trigger level in Volts.
ECL
sets trigger level to -1.3 Volts.
TTL
sets trigger level to 1.4 Volts.
Returns
<NR3>
is trigger level in Volts.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-877