Tektronix MSO54, Руководство программиста

Страница: 791 / 1026

Commands listed in alphabetical order
Examples
TRIGGER:A:BUS:B1:CAN:DATA:VALUE "1011"
sets the CAN data value to
1011.
TRIGGER:A:BUS:B1:CAN:DATA:VALUE?
might return
:TRIGGER:A:BUS:B1:CAN:DATA:VALUE "XXXXXXXX"
indicating
the data valule is set to XXXXXXXX.
TRIGger:{A|B}:BUS:B<x>:CAN:ERRType
This command sets or queries the type of error condition for a CAN bus to
triggering on. The bus number is speci
fi ed by x. The trigger condition must be
set to ERRor.
Conditions
Requires the SR-AERO Triggering and Analysis application.
Group
Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:CAN:ERRType
{ACKMISS|BITSTUFFing|FORMERRor|ANYERRor}
TRIGger:{A|B}:BUS:B<x>:CAN:ERRType?
Arguments
ACKMISS
speci fi es triggering on a missing ACK fi eld.
BITSTUFFing
speci fi es triggering on a bit stuf fi ng error.
FORMERRor
speci fi es triggering on a CAN FD form error. To use this option, the
CAN standard must be set to FDISO or FDNONISO.
ANYERRor
speci fi es triggering on any error type.
Examples
TRIGGER:A:BUS:B1:CAN:ERRTYPE ACKMISS
speci fi es triggering on any
missing ACK fi elds.
TRIGGER:A:BUS:B1:CAN:ERRTYPE?
might return ANYERROR, indicating that
the bus is triggering on all error types.
TRIGger:{A|B}:BUS:B<x>:CAN:FD:BRSBit
This command sets or queries the value of the bit rate switch bit (BRS bit) for a
CAN bus to triggering on. The bus number is speci
fi ed by x. The trigger condition
must be set to FDBITS, and the CAN standard must be FDISO or FDNONISO.
Conditions Requires the SR-AERO Triggering and Analysis application.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-775