Tektronix MSO54, Руководство программиста

Страница: 787 / 1026

Commands listed in alphabetical order
Syntax
TRIGger:{A|B}:BUS:B<x>:CAN:CONDition
{SOF|FRAMEtype|IDentifier|DATa|IDANDDATA|EOF|ERRor|FDBITS}
TRIGger:{A|B}:BUS:B<x>:CAN:CONDition?
Arguments
SOF
enables triggering on the start of frame.
FDBITS
enables triggering on the values of the BRS and ESI bits in an FD packet.
FRAMEtype
enables triggering on the type of frame.
IDentifier
enables triggering on a matching identi fi er.
DATa
enables triggering on matching data.
IDANDDATA
enables triggering on a matching identi fi er and matching data.
EOF
enables triggering on the end of frame.
ERRor
enables triggering on a speci fi ed error condition.
Examples
TRIGGER:A:BUS:B1:CAN:CONDITION?
might return
:TRIGGER:A:BUS:B1:CAN:CONDITION EOF indicating an end of fi le
condition.
TRIGGER:A:BUS:B1:CAN:CONDITION DATA
enables triggering on matching
CAN data.
TRIGger:{A|B}:BUS:B<x>:CAN:DATa:DIRection
This command sets the data direction (read, write or “nocare”) to be used to
search on a CAN bus signal. The trigger condition must be set to IDenti
fi er (using
TRIGger:{A|B}:BUS:B<x>:CAN:CONDition ). The bus number is speci fi ed
by <x>.
Conditions Requires the SR-AUTO Triggering and Analysis application.
Group Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:CAN:DATa:DIRection
{READ|WRITE|NOCARE}
TRIGger:{A|B}:BUS:B<x>:CAN:DATa:DIRection?
Arguments
READ
sets the CAN data direction to READ.
WRITE
sets the CAN data direction to WRITE.
NOCARE
sets the CAN data direction to either.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-771