Tektronix MSO54, Руководство программиста

Страница: 302 / 1026

Commands listed in alphabetical order
Examples
DISplay:WAVEView1:CH1_DALL:VERTical:POSition 1.0e0
sets the
vertical position to 1.0 divisions.
DISplay:WAVEView1:CH1_DALL:VERTical:POSition?
might return
:DISPLAY:WAVEVIEW1:CH1_DALL:VERTICAL:POSITION 0.0E+0
indicating
the vertical position is 0.0 divisions.
DISplay:WAVEView<x>:CH<x>_D<x>:STATE
This command sets or queries the display state of the speci fi ed digital channel in
the speci fi ed waveview.
Group
Display Control
Syntax
DISplay:WAVEView<x>:CH<x>_D<x>:STATE {<NR1>|OFF|ON}
DISplay:WAVEView<x>:CH<x>_D<x>:STATE?
Arguments
<NR1>
= 0 disables the display of the speci fi ed channel on the speci fi ed waveview;
any other value turns this feature on.
OFF
disables the display of the speci fi ed channel on the speci fi ed waveview.
ON
enables the display of the speci fi ed channel on the speci fi ed waveview.
Examples
DISplay:WAVEView1:CH1_D1:STATE OFF
turns off the speci fi ed digital
channel.
DISplay:WAVEView1:CH1_D1:STATE?
might return
:DISPLAY:WAVEVIEW1:CH1_D1:STATE 1
indicating the speci fi ed digital
channel is on.
DISplay:WAVEView<x>:CURSor? (Query Only)
This query returns the cursor parameters for the speci fi ed waveview.
NOTE.
WAVEView<x>
is the speci fi ed waveview and must be
WAVEView1
.
Group Cursor
Syntax
DISplay:WAVEView<x>:CURSor?
2-286 MSO54, MSO56, MSO58, MSO58LP Programmer