Tektronix MDO4054-3, Руководство пользователя, Страница: 125 / 222

Display Waveform or Trace Data
Positioning and Labeling Bus Signals
Positioning bus signals.
Push the appropriate front-panel bus button and turn multipurpose knob a to adjust the vertical
position of the selected bus. (See page 60, Setting Up a Serial or Parallel Bus .)
1. Push the appropriate front-panel bus button
to select that bus.
2. Turn multipurpose knob a to adjust the
vertical position of the selected bus.
Labeling bus signals.
To label a bus, do the following steps:
1. Push the appropriate front-panel bus button.
2. Push Label .
(See page 51, Labeling Channels and Buses .)
Bus (B1)
Parallel
De fi ne
Inputs
Thresholds (B1) Label
Parallel
Bus
Display
Event
Table
Positioning, Scaling, and Grouping Digital Channels
1. Push the front-panel D15–D0 button.
106 MDO4000 Series Oscilloscopes User Manual