Tektronix MDO4000C Series, Руководство пользователя

Страница: 82 / 160

CAN bus trigger
You can trigger on Start of Frame . Type of Frame , Identifier , Data , Id &
Data , End of Frame , and Missing Ack .
If you are setting up a CAN trigger and have made a Trigger On selection of
Type of Frame , push Frame Type on the lower menu, and select Data Frame ,
Remote Frame , Error Frame , or Overload Frame .
If you have made a Trigger On selection of Identifier , push Identifier on the
lower menu and select a Format . Then push Identifier on the side menu, and
enter a binary or hex value with multipurpose knobs a and b .
Push Direction on the lower menu and select the direction of interest: Read ,
Write , or Read or Write .
If you have made a Trigger On selection of Data , push Data on the lower menu
and enter the parameters of interest.
LIN bus trigger
You can trigger on Sync , Identifier , Data , Id & Data , Wakeup Frame , Sleep
Frame , or Error .
If you are setting up an LIN trigger and have made a Trigger On selection of
Identifier , Data , or Identifier & Data , push Identifier or Data on the lower
menu and enter the parameters of interest on the resulting side menu.
If you have made a Trigger On selection of Error , push Error Type on the
lower menu and enter the parameters of interest on the side menu.
Trigger setup
60 MDO4000C Series Oscilloscope User Manual
Preliminary