Tektronix MDO3012, Руководство пользователя

Страница: 28 / 243

Installation
Humidity:
Operating:
5% to 90% relative humidity (% RH) at up to +40°C,
5% to 60% RH above +40 C up to +55°C,
non-condensing
Non-Operating:
5% to 90% RH (Relative Humidity) at up to +40 C,
5% to 60% RH above +40°C up to +55°C,
5% to 40% RH above +55 °C up to +71 °C
non-condensing
Altitude:
Operating: 3,000 m (about 9,843 ft)
Non-operating: 12,000 m (39,370 ft)
Acquisition System: 1 M Ω
The maximum input voltage: At the BNC, 300 V
RMS
, Installation Category II. De-rate at 20 dB/decade between 4.5 MHz and
45 MHz, De-rate 14 db between 45 MHz and 450 MHz. Above 450 MHz, 5 V
RMS
.
Acquisition System: 50 Ω and 75 Ω
The maximum input voltage: 5 V
RMS
with a peak at ±20 V. (DF ≤ 6.25%).
Dedicated RF Input:
The maximum operating input level:
Average Continuous Power: +20 dBm (0.1 W)
DC maximum before damage: ±40 V
DC
Max “No damage” +33 dBm (2 W) CW
Peak Pulse Power: +45 dBm (32 W)
Peak Pulse Power de
fi ned as <10 μ s pulse width, <1% duty cycle, and reference level of ≥ +10 dBm
CAUTION. To ensure proper cooling, keep the sides and rear of the instrument clear of obstructions. Ventilation clearance
should be at least 51 mm (2 in) on the left side, when looking at the front of the instrument, and on the rear of the instrument
MDO3000 Series Oscilloscope with a P6316 Digital Probe
Threshold Accuracy: ±(100 mV + 3% of threshold setting after calibration)
Threshold Range: +25 V to –15 V.
Maximum nondestructive input signal to probe: +30 V to -20 V
Minimum signal swing: 500 mV
peak-to-peak
Input resistance: 101 K Ω
Input capacitance: 8.0 pF typical
Pollution Degree: 2, Indoor use only
6 MDO3000 Series Oscilloscopes User Manual