Tektronix MDO3012, Руководство пользователя

Страница: 202 / 243

Save and Recall Information
14. When done, push OK Accept .
Printing with One Button Push
Once you have connected a printer to your oscilloscope and set up print parameters, you can print current screen images with
a single push of a button:
Push the printer icon button in the lower left
corner of the front panel.
Using Oscilloscope Security Features
Erasing Oscilloscope Memory
The MDO3000 provides optional enhanced security to enable password protected control of turning on/off all instrument ports.
You can erase all setup and waveform information saved in the nonvolatile oscilloscope memory with the TekSecure function.
If you have acquired con
fi dential data on your oscilloscope, you may want to execute the TekSecure function before you
return the oscilloscope to general use. The TekSecure function:
Replaces all waveforms in all reference memories with null values
Replaces the current front panel setup and all stored setups with the default setup
Displays a con fi rmation or warning message, depending on whether the veri fi cation is successful or unsuccessful
With the MDO3SEC option, you can also turn the I/O ports on or off and turn the fi rmware upgrade capability on or off.
To use TekSecure, without the MDO3SEC application module installed:
1. Push Utility .
2. Push Utility Page .
Utility
Page
3. Turn the Multipurpose a knob and select
Security .
Security
180 MDO3000 Series Oscilloscopes User Manual