Tektronix Keithley 4200-RPC-2 Скачать руководство пользователя

Страница: 1 / 3

Keithley Instruments

28775 Aurora Road
Cleveland, Ohio 44139
1-800-833-9200

Model 4200-RPC-2

Remote Preamplifier Cable Assembly Instructions

PA-688 Rev. B April 2021

*PPA-688B*

Overview

The Model 4200-RPC-2 Remote Preamp Cable is used to connect a source measurement unit (SMU) installed

in a Model 4200A-SCS Parameter Analyzer to a remotely mounted 4200-PA preamplifier.

The 4200-RPC-2 is 2 meters long and is terminated at each end with a high-density DB15 connector. One end

mates to the preamplifier CONTROL connector on the 4200-PA. The other end mates to the PA CNTRL

connector on the matching SMU installed in the system. An example configuration is shown in the

following figure.

Figure 1: 4200-RPC-2 remote preamplifier cable installed in a system

Each preamplifier is matched to a specific SMU. When changing connections, maintain the

connections between the remotely mounted preamplifier and the SMU to which it was

originally connected.

You must use a strain relief (not included) at the preamplifier connection of the 4200-RPC-2 cable.

Содержание Keithley 4200-RPC-2

Страница 1: ...rminated at each end with a high density DB15 connector One end mates to the preamplifier CONTROL connector on the 4200 PA The other end mates to the PA CNTRL connector on the matching SMU installed i...

Страница 2: ...in the specifications operating manual and instrument labels do not connect any instrument to mains Exercise extreme caution when a shock hazard is present Lethal voltage may be present on cable conne...

Страница 3: ...suppliers as long as they are equivalent to the original component note that selected parts should be purchased only through Keithley to maintain accuracy and functionality of the product If you are u...