Tektronix Keithley 2268 Series, Справочное руководство

Страница: 244 / 253

SCPI Command Reference Series 2268 850 Watt DC Power Supplies Reference Manual
242 2268S-901-01 Rev. A / January 2015
Protection Commands
Function SCPI Command Description
Parameter and
Range
Query
Enable the
interlock
functionality. [:]SENSe[<channel>]:PROTection
:INTerlock[:STATe] Control the Enable/Disable
state of the Interlock System. ?|ON|OFF Yes
Auto Sequence Commands
Function SCPI Command Description Parameter and Range Query
Delete all
sequences. [:]PROGram[<channel>]:DELete:ALL Erases the sequence
currently in memory. N/A
Change Auto
Sequence
operating state. [:]PROGram[<channel>]:STATe Access to the run state of
the Sequence. ?|RUN|STOP|PAUSE Yes
Program
selected
sequence end
action. [:]PROGram[<channel>]:REPeat Sets the number of times to
repeat the sequence. ?|<Repeat count (1–
65534)>INFinity Yes
Begin
Recording
Auto Sequence
Program [:]PROGram[<channel>][:RECord]:STARt Start recording new
sequence (overwrites old
sequence). N/A
Stop Recording
Auto Sequence
Program [:]PROGram[<channel>][:RECord]:STOP Stop recording the auto
sequence program.
(Sequence ready to run.) N/A
Set the
Program
Command
Execution
Delay Time [:]PROGram[<channel>][:STEP]:DWEL1 Sets the amount of time to
delay between commands
in a Sequence. ?|<Dwell time in
seconds> Yes
Read the
current
contents of the
Autosequence
programming
buffer. [:]PROGram[<channel>]:READback? Read the current contents
of the Autosequence
programming buffer. ? Yes