Tektronix KEITHLEY 2200 Series, Руководство программиста, Страница: 44 / 104

Commands Listed in Alphabetical Order
Examples
OUTPUT:PON RST
OUTPUT:PON?
might return
RCL0
, which would indicate that the instrument will
return to the present output state if the power is cycled.
[SOURce:]OUTPut:SERies
This command sets the serial state of CH1 and CH2.
Group Source
Syntax
[SOURce:]OUTPut:SERies {0|1|OFF|ON}
[SOURce:]OUTPut:SERies?
Arguments
0
or
OFF
sets the parallel state to off.
1
or
ON
sets the parallel state to on.
Examples
[SOURCE:]OUTPUT:SERIES
[SOURce:]OUTPut[:STATe][:ALL]
This command turns all of the enabled output channels on or off.
Group Source
Syntax
[SOURce:]OUTPut[:STATe][:ALL] {0|1|ON|OFF}
[SOURce:]OUTPut[:STATe][:ALL]?
Related Commands [SOURce:]OUTPut:TIMer[:STATe]
Arguments
0
or
OFF
turns the power supply output off.
1
or
ON
turns the power supply output on.
Returns
1|0
Examples
OUTPUT ON
OUTPUT?
might return 0, which would indicate that the outputs are off.
2-30 Series 2200 Programmable Multichannel DC Power Supplies Programmer Manual