Section 1: Introduction
Model 2100 6½-Digit Resolution Digital Multimeter
1-4
2100-905-01 Rev. B April 2020
Recommended test equipment
Use a Fluke Model 5700A Calibrator and 5725A Amplifier (or the equivalent) to perform the 2100
multimeter adjustments.
Firmware revision
If your 2100 has firmware versions 1.03 or 1.04, the firmware must be updated to the latest version
before this procedure can be performed.
To identify the firmware version, press the
QUERY
button and enter the following SCPI command:
*IDN?
The following figure shows the typical location of the firmware version number. If the firmware
requires updating, refer to the
) for detailed
instructions.
Figure 2: Model 2100 Command Control
