Tektronix IsoVu TIVP Series, Руководство пользователя

Страница: 35 / 57

Reference information
Specifications
The following tables list the specifications for the measurement system. The specifications are Typical unless noted
otherwise.
Note: Preliminary specifications are indicated by an asterisk (*)
The performance limits in this specification are valid with these conditions:
• The instrument must be in an environment with temperature, altitude, and humidity within the operating limits described
in these specifications.
• The instrument must have had a warm-up period of at least 20 minutes.
• The measurement system is powered from a TekVPI compatible oscilloscope.
Warranted specifications describe guaranteed performance with tolerance limits or certain type-tested requirements.
The performance verification procedures are listed later in this document. Performance verification procedures on page 45
Overview
Characteristic TIVP1 TIVP05 TIVP02
Bandwidth 1 GHz 500 MHz 200 MHz
Rise time 450ps 850ps 2ns
Differential Input Voltage Range,
Offset Range, Differential
Impedance Use only the sensor tip cables listed.
Sensor tip cable Differential input
voltage range Offset range Input impedance
SMA Input (50 Ω
mode) ±5 V ±25 V 50 Ω || N.A.
SMA Input (1 MΩ
mode) ±5 V ±25 V 1 MΩ || 11 pF
TIVPMX10X ±50 V ±200 V 10 MΩ || 2.8 pF
TIVPMX50X ±250 V ±250 V 10 MΩ || <5 pF*
TIVPSQ100X ±500 V ±500 V 10 MΩ || <5 pF*
TIVPWS500X ±2.5 kV ±2.5 kV 40 MΩ || <4 pF*
TIVPMX1X ±5 V ±25 V 50 Ω or 1 MΩ || 11
pF
Common Mode Rejection Ratio
Sensor tip
cable DC 1 MHz 100 MHz 200 MHz 500 MHz 1 GHz
SMA Input
(50 Ω mode) 160 dB 145 dB 100 dB 100 dB 100 dB 90 dB
SMA Input (1
MΩ mode) 160 dB 145 dB 100 dB 100 dB 100 dB 90 dB
TIVPMX10X 160 dB 115 dB 92 dB 90 dB 85 dB 80 dB
TIVPMX50X 160 dB* 104 dB* 85 dB* 80 dB* 73 dB* 70 dB*
Table continued…
Reference information
TIVP Series IsoVuTM Measurement System User Manual 35