Tektronix IsoVu TIVM Series, Руководство пользователя, Страница: 74 / 82

Appendix A: Remote programming
CH<n>:PRObe:FORCEDRange <NR3>
The command selects the dynamic range of the sensor tip in V
p-p
and is dependent
the attached sensor tip cable.
The following table lists the sensor tip cables and the dynamic range.
Table 14: Sensor tip cables and dynamic ranges
Sensor tip cable Range V
p-p
1X 1.0 or 2.0
5X 5.0 or 10.0
10X 10.0 or 20.0
25X 25.0 or 50.0
50X 50.0 or 100.0
CH<n>:PRObe:FORCEDRange? The query returns the dynamic range of the
sensor tip in V
p-p
.
CH<n>:PRObe:GAIN?
Returns the gain factor of the sensor tip (inverse of attenuation). Dependent on the
attached sensor tip cable. Query only.
CH<n>:PRObe:ID {:SERnumber | :TYPe}?
Query only. When sending only PRObe:ID?, the query returns the sensor tip type
string followed by the serial number string.
When sending PRObe:SERnumber?, the query returns the serial number string.
When sending PRObe:TYPe?, the query returns one of the following sensor tip
type strings (note the trailing spaces within the return strings):
“TIVM1 ”(1GHz, 3m)
“TIVM1L ”(1GHz, 10m)
“TIVM05 ”(500MHz, 3m)
“TIVM05L”(500MHz, 10m)
“TIVM02 ”(200MHz, 3m)
“TIVM02L”(200MHz, 10m)
56 TIVM Series Measurement System User Manual