Tektronix H600 RFHawk, Руководство по обслуживанию

Страница: 106 / 109

Speci fi cations
Table 6-4: General purpose RF measurement characteristics
Characteristic Description
General Purpose RF Channel Power Measurement
Measurement
Bandwidth
Range 1 kHz – 20 MHz
Accuracy ≤ 1.2 dB; +20 dBm to –60 dBm; Resolution BW < 100 kHz
+20 dBm to –40 dBm; Resolution BW ≥ 100 kHz
1 MHz to 3.2 GHz , preamp off
≤ 2 .4 dB; –60 dBm to –75 dBm; Resolution BW < 100 kHz
–40 dBm to –55 dBm; Resolution BW ≥ 100 kHz
10 MHz to 3.2 GHz , preamp on
≤ 1.8 dB; +20 dBm to –50 dBm; Resolution BW < 100 kHz
+20 dBm to –40 dBm; Resolution BW ≥ 100 kHz
3.2 GHz to 6.2 GHz , preamp off
≤ 3 dB; –50 dBm to –75 dBm; Resolution BW < 100 kHz
–40 dBm to –55 dBm; Resolution BW ≥ 100 kHz
3.2 GHz to 6.2 GHz , preamp on
Speci
fi cations apply for default control settings (Auto RBW, Auto Level)
Occupied Bandwidth Measurement
Percent
Power
Inclusion
Range 50% - 100% in 1% steps
RF Field Strength
Channel
Bandwidth
Range Same as Channel Power
Accuracy Same as Channel Power
Table 6-5: Amplitude vs. Time measurement characteristics
Characteristic Description
Center Frequency
Range
Minimum center frequency = 10 kHz + Span / 2, preamp off
Minimum center frequency = 10 MHz, preamp on
Maximum center frequency = 6.2 GHz
Resolution 1 Hz
Span
Range 5 kHz to 20 MHz in 1-2-5 sequence
Sample rate is automatically set based on the span selection
6–6 H600 & SA2600 Service Manual