manualshive.com logo in svg

Tektronix Grass Valley 3000, Руководство пользователя

Поделиться
Скачать
Tektronix Grass Valley 3000 Скачать руководство пользователя страница 223

A-1

NOTE:  

This appendix applies specifically to the Model 2200, 

Model 3000, and Model 4000 Switchers, but the general principals 
discussed here may apply as well to other switchers and other devices.

Introduction

The purpose of this appendix is to explain what shaped video and 
unshaped video are, where and why they are used, and what you 
need to do so your equipment will handle them properly.

What are Shaped and Unshaped Video?

Shaping and unshaping are generally involved only in keying and 
compositing situations.

Whenever a key is performed, there are always three signals: the 
key source, the key fill (fill video), and the background video. The 
key signal cuts a hole in the background, into which the fill video 
is inserted. Devices such as character generators often output both 
the key signal and the fill video.

Appendix A — 
Shaped and Unshaped Video

A

Содержание Grass Valley 3000





























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды