manualshive.com logo in svg

Tektronix Grass Valley 3000, Руководство пользователя

Поделиться
Скачать
Tektronix Grass Valley 3000 Скачать руководство пользователя страница 186

4-48

Section 4— Switcher Operations

Setup

1.

Clear the switcher. 

See “Clearing the Switcher” on page 4-4.

).

2.

You will need the following sources:

a.

Background still

b. Character generator

Basic E-MEM Operations

The following topics describe enabling register effects, storing and 
recalling effects, Effects Dissolve transitions, and Learn Sequence 
operations.

Enabling E-MEM Register Levels

The E-MEM Enable buttons are used to set up switcher functions 
which may then be learned or recalled from an E-MEM register. 
Each register is partitioned into sections (or “levels”) based on the 
state of the Enable buttons.

If 

AUTO RCL

 (Auto Recall) is on while an effect is learned, the state 

of the Enable buttons is learned as part of the effect. Turn 

AUTO 

RCL

 off to 

not

 learn the enables for an effect.

Refer to your

 Operator’s Reference

, Control Panel Descriptions, 

Effects Memory Subpanel, for more information.

Содержание Grass Valley 3000





























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды