manualshive.com logo in svg

Tektronix DTG5078, Руководство пользователя

Поделиться
Скачать
Tektronix DTG5078 Скачать руководство пользователя страница 32

Data Structure

1-12

DTG5078 & DTG5274 & DTG5334 Data Timing Generator User Manual 2

Deleting a Group

You can delete the particular group(s) you selected or all the groups.

1.

Activate the Group List in the Channel Group window.

2.

To delete a group, select the group by using the Up or Down arrow key.

3.

Push the front panel 

MENU 

button.

4.

Select the 

Edit 

menu, and then select 

Delete Group

 or 

Delete All Groups

. 

Alternatively, place the mouse pointer in the Group List table and right-click, 
and then select the 

Delete Group

 or 

Delete All Groups

.

5.

Select the menu option (Delete Group or Delete All Groups) to display the 
confirmation dialog.

6.

Select 

OK 

to delete the group(s).

Selecting a Preset

Grouping Option

The following three combinations of a group and its logical channel are provided 
in the data timing generator.

„

8 channels per group

„

1 channel per group

„

All channels per group

To select one of these options, do the following.

1.

Activate the Group List in the Channel Group window.

2.

Push the front panel 

MENU 

button. 

3.

Select the 

Edit 

menu, and select 

Preset

, and then select 

8 Channels per 

Group

 or 

1 Channel per Group

 or 

All Channels in One Group

. 

Alternatively, place the mouse pointer in the Group List table and right-click, 
then select the 

Preset

, and then select 

8 Channels per Group

 or 

1 Channel 

per Group

 or 

All Channels in One Group

.

4.

Select the menu item to display the confirmation dialog.

5.

Select 

OK 

to create the group.

Channels

Physical Channel

The physical channel is identified by the mainframe number (1 to 3; for 
Master-Slave configuration), slot location (A to H), and channel number (1 to 4).

The installed physical channels are displayed in the right window pane of display 
area. Any channel indicated by a bullet in a white rectangle has already been 
assigned to a logical channel.

Содержание DTG5078





































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды