Tektronix DSA8300, Руководство программиста

Страница: 47 / 455

Command Groups
Command Description
EXPort Exports waveform and histogram data to a
fi le
EXPort:TYPE Sets or queries the form of the exported
waveform data
IMPort CUSTommask Imports and loads the custom mask
RECAll:SETUp Recalls saved instrument settings
RECAll:WAVEform Recalls a stored waveform into reference
location
SAVe:SETUp Saves the current instrument settings to a
speci
fi ed location
SAVe:WAVEform Saves waveform in reference or fi le
Status and Error Command Group
You use the commands in the Status and Error command Group to determine the
status of the instrument and control events. Several commands and queries used
with the instrument are common to all devices on the GPIB bus. The IEEE Std
488.2–1987 de
fi nes these commands and queries. The common commands begin
with an asterisk (*) character.
Command Description
*CLS Clears status
*ESE Sets or returns the standard Event Status
Enable Register
*ESR? Returns the standard Event Status Register
*OPC Sets OPC event when all pending operations
are
fi nished
Returns "1" when all current operations
complete
*OPT? Returns a list of installed options
*PSC Sets or returns the power on status fl ag
*RST Resets the instrument to factory default
settings
*SRE Sets or returns the bits in the Service
Request Enable Register
*STB? Returns the contents of the Status Byte
Register
*WAI Prevents the instrument from executing
further commands until all pending
operations
fi nish
ALLEv? Returns all events
BUSY? Returns instrument status
DSA8300 Programmer Manual 2-31