Tektronix DSA8300, Руководство программиста

Страница: 306 / 455

Commands Listed in Alphabetical Order
Syntax
SELect:REF<x> { ON | OFF | NR1 }
SELect:REF<x>?
Related Commands SELect:CONTROl
Arguments
ON
displays the speci fi ed reference waveform.
OFF
turns off the display of the speci fi ed reference waveform.
NR1
set to 0 turns off the display of the speci fi ed reference waveform; any
other value displays the speci fi ed reference waveform.
Examples
SELECT:REF4 1
displays the Reference 4 waveform.
SELECT:REF5?
might return
SELECT:REF5 0
, indicating that the display of
the Reference 5 waveform is disabled.
NOTE. A query always returns a 0 or 1.
SET? (Query Only)
This query only command returns a string listing the instrument settings, except
for con
fi guration information for the calibration values. You can use this string to
return the instrument to the state it was in when you made the SET? query. This
command is identical to the *LRN? command.
Group
Miscellaneous
Syntax
SET?
NOTE. The SET? query always returns a string with command headers, regardless
of the setting of the HEADer command. This is because the returned string is
intended to be sent back to the instrument as a command string. The VERBose
command can still be used to specify whether the returned headers should be
abbreviated or full length.
Related Commands HEADer
*LRN?
VERBose
2-290 DSA8300 Programmer Manual