Tektronix DPO4034B, Руководство по обслуживанию

Страница: 41 / 53

Maintenance
Unpacking and Repacking Instructions
This section contains the information needed to unpack the oscilloscope and
repack it for shipment or storage.
Unpacking
The oscilloscope and its standard accessories are carefully packed at the factory in
a shipping carton. If, upon receipt, damage to the shipping carton is evident, tell
the shipper. Tektronix, Inc. is not responsible for damage caused during shipping.
If you have not already done so, carefully remove the oscilloscope and its
accessories from the shipping carton and inspect them for damage. Save the
shipping carton for repacking or storage.
Repacking
Use a corrugated cardboard shipping carton having a test strength of at least 275
pounds (125 kg) and with an inside dimension at least six inches (15.25 cm)
greater than the instrument dimensions.
If the instrument is being shipped to a Tektronix Service Center, enclose the
following information:
The owner’s address
Name and phone number of a contact person
Type and serial number of the instrument
Reason for returning
A complete description of the service required
Seal the shipping carton with an industrial stapler or strapping tape.
Mark the address of the Tektronix Service Center and also your own return address
on the shipping carton in two prominent locations. See www.tektronix.com/service
to
fi nd a service center near you.
Storage The oscilloscope should be stored in a clean, dry environment. The following
environmental characteristics apply for both shipping and storage:
Temperature range: –4 °F to +140 °F (–20 °C to +60 °C)
Altitude: To 30,000 feet (9144 m )
See the Tektronix MSO4000B and DPO4000B Series Digital Phosphor
Oscilloscopes Speci fi cations and Performance Veri fi cation Technical Reference
for a complete listing of the environmental speci fi cations.
MSO4000B and DPO4000B Series Digital Phosphor Oscilloscopes Service Manual 29