Tektronix DPO2304SX Скачать руководство пользователя страница 330 | Manualshive

Страница: 330 / 920

Tektronix DPO2304SX Скачать руководство пользователя страница 330

Select a search type

From the Analyze menu, select Search; then open the Select tab.

Overview

Use the controls in this window to set up the instrument to automatically search and place mark(s). The instrument can search for
and mark many of the same conditions that are available for triggers.

NOTE. Search and mark operations are not available on digital channels.

This document is for more than one instrument. Your instrument, or instrument setup, may not include some of these features.
For DPO70000SX instruments see

Features not available

To use

For information on the controls, click the buttons.

■

■

■

Search/Mark Controls

NOTE. The Edge search type is standard, all other search types are optional.

Behavior

You can search for and mark regions with particular edges, pulse widths, runts, logic states, rise and fall times, setup and hold
violations and bus types. You can also search on math and reference waveforms.

Analyzing waveforms

298

DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series

«
...
328
329
330
331
332
...
»

Содержание DPO2304SX

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов