Tektronix AWG70001B, Инструкции по установке и безопасности

Страница: 37 / 50

Front panel connectors
Table 1: Front-panel connectors
Connector Description
Analog outputs (+ and –)
AWG70001B – CH1
AWG70002B – CH1 and CH2
These connectors supply analog signals.
The channel LEDs light to indicate when the channel is enabled and the output is electrically
connected. The LED color matches the user defined waveform color.
The output connector utilizes the Planar Crown
®
Universal Connector System providing you
the ability to easily replace a damaged connector.
You also have the ability to use a variety of different types of connectors.
The instruments ship with SMA type adapters installed.
AC output (option AC, AWG70001B only) This connector supplies a single-ended analog signal. The AC output provides for additional
amplification and attenuation of the output signal.
The AC output LED lights to indicate when the AC output is enabled and the output is
electrically connected. The LED color matches the user defined waveform color.
The output connector utilizes the Planar Crown
®
Universal Connector System providing you
the ability to easily replace a damaged connector.
You also have the ability to use a variety of different types of connectors.
Operation basics
AWG70000B Series Installation and Safety Instructions 21