Tektronix AWG-HD, Инструкции по установке и безопасности

Страница: 8 / 83

Install the AWG-HD into a system
Environmental
speci
fi cation Description
Power 100-240 V, 50/60 Hz, 120 W
Temperature 10 -30 Deg. C (operating)
Humidity
Operating 5% to 90% relative humidity (% RH) at up to +30° C, non-condensing
Non-operating
5% to 90% relative humidity (% RH) at up to +30° C, non-condensing
5% to 45% RH above +30° C up to +50° C, non-condensing
Altitude 3000 m
WARNING.
To reduce the risk of fi re and shock, ensure that the mains power
supply voltage fl uctuations do not exceed 10% of the operating voltage range.
Install the AWG-HD into a system
The AWG-HD is part of a system of Tektronix instruments that allows you to
perform HDMI testing. The following equipment makes up the system that the
AWG-HD instrument will be inserted into.
Table 1: System equipment
Instrument Quantity Description
AWG-HD 1 HDMI fi xture for sink (Rx) testing with programmable delay
and amplitude.
AWGSYNC01 1 Synchronization hub to synchronize signal output from two to
eight channels on two to four AWG70000 series instruments.
AWG70001 4 Arbitrary waveform generator. 50 GS/s.
DPO70000SX
Series 1 Digital Phosphor Oscilloscope.
DUT As
required Customer device under test.
HD-EDID–TEMSS 1 HDMI 2.1 EDID Emulator 600-1121-001 with Sink/Source
License
HDA2.1-TPA-P 1 HDMI 2.1 Plug Test Adapter
HDA2.1-TPA-R 1 HDMI 2.1 Receptacle Test Adapter
2 AWG-HD Installation and Safety Instructions