Tektronix AWG-HD, Инструкции по установке и безопасности

Страница: 7 / 83

Introduction
The Tektronix AWG-HD is an HDMI fi xture for sink (Rx) testing with
programmable delay and amplitude. This document provides the following
information:
Connectors and environmental speci fi cations
How to install the AWG-HD into a system
Safety and compliance information for the AWG-HD product
Related documents
available on www.tek.com
AWG-HD Programmer Manual
TekExpress® FRL Solution Application Help (Available from the
TekScope menu in the TekExpress application and as downloadable PDF
at www.tek.com.)
AWGSYNC01 Safety and Installation Manual
AWG70000 Series Help
AWG-HD Speci fi cations and Performance Veri fi cation Technical Reference
TekExpress® eARC Solution Application Help (Available from the
TekScope menu in the TekExpress application and as downloadable PDF
at www.tek.com.)
AWG-HD connectors and environmental speci fi cations
Front panel
connector
Quantity Description
SMA. 50
Ω
16 There are 4 identical channel connectors.
Each channel has 2 IN connectors and
2 OUT connectors.
Rear panel
connector
Description
Power 100-240 V, 50/60 Hz, 120 W
Ethernet 10/100 Mbps, CAT5e
AWG-HD Installation and Safety Instructions 1