Performance verification
AFG31000 Series Arbitrary Function Generator Specification and Performance Verification Technical Reference
39
Test records
This manual contains test records that you can use to record the performance test results for your
AFG31000 Series Arbitrary Function Generator. These test records are in the
51) section of this manual.
The test records are organized by model number. Some models have different test parameters than
others, so make sure you use the ones that apply to your arbitrary function generator model.
The following list contains links to each of the test records.
AFG31021 and AFG31022 test record
(on page 52)
AFG31051 and AFG31052 test record
(on page 54)
AFG31101 and AFG31102 test record
(on page 58)
AFG31151 and AFG31151 test record
(on page 61)
AFG31251 and AFG31252 test record
(on page 64)
Frequency/period test
This test verifies the frequency accuracy of the AFG31000 Series. All output frequencies are derived
from a single generated frequency; you only need to check one frequency point on channel 1.
NOTE.
Record the results of this test in the test record for your model in
(on page 51).
To verify frequency accuracy:
1.
Connect the AFG31000 Series to the frequency counter as shown in the following figure.
Figure 5: Connections for the frequency/period test
2. Press the
Default
key on the AFG31000 Series front panel. A dialog box is displayed.
3. Select
OK
to recall the AFG31000 Series default setup.