Tektronix AFG1000 Series, Руководство пользователя

Страница: 56 / 78

AFG1000 Series Arbitrary Function Generator Programmer Manual 47
Command Descriptions
Group
Source
Syntax
[SOURce[1|2]]:PM[:DEViation]
{<deviation>|MINimum|MAXimum}
[SOURce[1|2]]:PM[:DEViation]
? [MINimum|MAXimum]
Arguments <deviation>::=<NR3>[<units>]
where:
<NR3> is the phase deviation.
<units>::=[RAD | DEG]
If <units> are omitted, RAD is specified automatically. The setting ranges are:
RAD: 0 PI to +1 PI, relative to phase value
DEG: 0 to +180, in 1 degree steps, relative to phase value
Returns
<deviation>
Examples
SOURce1:PM:DEViation MAXimum
sets the maximum value for the CH 1 phase deviation.
[SOURce[1|2]]:PM:INTernal:FREQuency
This command sets or queries the internal modulation frequency of PM
modulation for the specified channel. Use this command when the internal
modulation source is selected.
Set the internal modulation frequency from 2 mHz to 20.00 kHz with resolution
of 1 mHz.
Conditions For the AFG1022, use
[SOURce1]
. Modulation, sweep, and burst conditions do
not apply to CH2 for the AFG1022.
Group Source
Syntax
[SOURce[1|2]]:PM:INTernal:FREQuency
{<frequency>|MINimum|MAXimum}
[SOURce[1|2]]:PM:INTernal:FREQuency
? [MINimum|MAXimum]