manualshive.com logo in svg

Tektronix 6 series, Печатная инструкция, Страница: 174 / 518

Поделиться
Скачать
Tektronix 6 series Скачать руководство пользователя страница 174

Timing Measurements panel

Use the Timing Measurements panel to add timing-related measurements to the Results bar. Timing measurements can be
taken on time-domain analog, math, and reference waveforms. Timing measurements can also be taken on some digital channel
signals.

To open the Timing Measurements panel:

1. Tap the Add New... Measure button.

2. Tap the Timing Measurements panel.

To add a measurement to the Results bar:

1. Select the signal source.

2. Select a measurement. If a measurement requires two signal sources, select the sources in the Source 1 and Source

2 fields.

3. Tap Add. You can also double-tap a measurement to add it immediately to the Results bar.

Menus and dialog boxes

 

154

 MSO54, MSO56, MSO58, MSO58LP, MSO64 Help

Содержание 6 series







































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов