Tektronix 5110, Инструкция по эксплуатации

Страница: 26 / 128

Specification and Performance Check-5110
Table 2-6 (cont)
ENVIRONMENTAL
Characteristics Performance Requirements Supplemental Information
Shock
Operating and
Non-Operating
30 g's, 1/2 sine, 11 ms duration,
2 shocks in each direction along
3 major axes for a total of 12
shocks.
Transportation Qualified under National Safe Transit
Committee Test Procedure 1A,
Category II.
PHYSICAL CHARACTERISTICS
Table 2-7
PHYSICAL
Parameter Bench Oscilloscope
Rack Oscilloscope
Overall Dimensions
Height 12.0 in. (30.5 cm).
5.2 in. (13.2 cm).
Length 20.4 in. (51.8 cm).
20.4 in. (51.8 cm). Rack
depth required: 19.0 in.
(48.3 cm).
Width
8.4 in (21.4 cm).
19.0 in (48.3 cm).
Net Weight Approximately 19.1 lbs.
(8.7 kg).
Approximately 23.1 lbs.
(10.5 kg).
Shipping Weight
Approximately 30.0 lbs.
(13.6 kg).
Approximately 39.0 lbs.
(17.7 kg).
Export Weight
Approximately 45.0 lbs.
(20.4 kg).
Approximately 59.0 lbs.
(26.8 kg).
Finish
Anodized aluminum panel and chassis. Blue-vinyl coated cabinet.
POWER TO EXTERNAL EQUIPMENT
With the plug-in units removed from the oscilloscope,
the unused power capability of the oscilloscope power
supplies may be used to operate external electronic
equipment. The recommended access to the power
supplies is through the Interface circuit board. Special
equipment is available from Tektronix, Inc. to facilitate
connection to the individual powersupply voltages. Order
the equipment through your local Tektronix Field Office or
representative.
Table 2-8 lists the maximum current drawand interface
pin assignment for only those power supply voltages
recommended for operating external electronic equip­
ment.
Table 2-8
POWER AVAILABLE TO EXTERNAL EQUIPMENT
Power
Supply
Voltage
Maximum
Current/
Compartment
Maximum
Total
Current
Interface
Pin No.
+200 V 10 mA
30 mA
A1
+30 V
80 mA 240 mA
A5
+5 V
130 mA
390 mA B2
-30 V
80 mA 240 mA
B5
24
REV A. NOV 1978