Bus Search configuration menus
FlexRay serial bus configuration menu
Use the Flexray bus menu (optional) to set up and display a Flexray automotive network serial bus waveform.
To set up the FlexRay serial bus:
• To create a new FlexRay bus waveform, tap the Add Math Ref Bus badge on the Settings bar and select FlexRay. Open the bus
configuration menu by double clicking on the badge. Set the Bus Type to FlexRay.
• To change the settings on an existing FlexRay serial bus waveform, double-tap the Bus waveform badge and make necessary
changes.
FlexRay serial bus menu fields and controls
Field or control
Description
Display
Turns on or off displaying the bus in the Waveform view.
Label
Enter a label for the bus. The default label is the selected bus type.
To enter label text, double-tap the field and enter label using the virtual keyboard, or tap the field and
enter text using an attached keyboard.
Bus Type
Set to FlexRay.
Signal Type
Select the FlexRay signal type being measured.
Channel Type
Set to A or B channel.
Source
Select the FlexRay signal source.
Threshold
Sets the threshold value for the TX or RX signal type.
High Threshold, Low
Threshold
Sets the high and low threshold values for the BM Inverted and Bdiff/BP signal types.
Bit Rate
Select a bit rate. To set a custom bit rate, select Custom and enter a value in the Custom Rate field.
Display Format
Sets the waveform view to show just the decoded bus information, or the decoded bus and the logical
views of each constituent signal.
Decode Format
Sets the decode format used to display the bus information. Formats are Hex, Binary, and Mixed.
Mixed format displays Payload/Data and Trailer/CRC bytes as hexadecimal values. Other fields are
displayed in ASCII, decimal, or hexadecimal format.
Other bus types
Serial bus types, such as CAN, LIN, Ethernet, and so on, are available as purchasable options. Once purchased and installed, the new bus
types are shown in the Bus Type menu. The serial bus options also add corresponding bus trigger capabilities to the Trigger menu.
Use the following links to access information on specific Bus configuration menus.
Parallel Bus configuration menu
I2C serial bus configuration menu
on page 123
SPI serial bus configuration menu
on page 131
on page 129
Menus and dialog boxes
3 Series Mixed Domain Oscilloscope Printable Help
122
