Tektronix 071-0833-02, Инструкция по эксплуатации

Страница: 9 / 69

K4000 Transport Cart Instructions
1
Introduction
The Tektronix K4000 Transport Cart requires some assembly. This manual tells
how to assemble and use the cart.
You can assemble the K4000 Transport Cart by yourself, but it is easier if you
have another person to help you.
You will need a large flat area to assemble the cart. The area should be level and
large enough to move the various parts into place. A carpeted floor space is ideal.
Assembly will require approximately 2 hours.
Tools
You will need a 3/4 inch (19 mm) open--end wrench, or an adjustable wrench that
can be adjusted to that size.
Other tools are included with the K4000 Transport Cart. These include a 3/16
inch Allen wrench and a circular bubble level.
Parts Identification
The large pieces of the K4000 Transport Cart are packed separately in the
shipping carton. A bag of small parts is packed in a box with the casters and
other small parts. The included tools are also packed in this bag. Figure 1 on
page 2 shows the small parts you will be using.
Table 1 on page 3 lists all the parts needed to assemble the cart, including the
large pieces and assemblies. Take an inventory now to familiarize yourself with
the parts for the assembly process.