Tektronix 071-0833-02, Инструкция по эксплуатации

Страница: 13 / 69

K4000 Transport Cart Instructions
5
Base Assembly
Begin assembling the cart by joining the leg assemblies using the strut, and then
putting on the casters. You will use these parts:
H
2 Locking Casters
H
2 Non--Locking Casters
H
2 Uprights
H
2 Legs
H
4 End Caps
H
1 Strut
H
4 1/2 inch Split Lockwashers
H
4 1/4 20 Cap Head Screws, 1/2 inch length
H
4 1/4 inch Tooth Lockwashers
H
4 1/4 20 Cap Head Screws, 1--1/4 inch length
H
4 1 inch Fender Washers
H
4 Weld Nuts
H
4 Bumpons
You will use a 3/4 inch (19 mm) wrench or adjustable wrench, and the 3/16 inch
Allen wrench included with your cart.
1. Prepare the strut as shown in Figure 3. Position the weld nut with the raised
threaded flange toward the strut. Leave each screw assembly loose; do not
screw the weld nut onto the cap head screw more than one full turn.