TEKTROL TEK-B ATCH 7900B, Инструкция по эксплуатации

Страница: 20 / 35

Instruction Manual
Tek-Batch 7900B
www.tek-trol.com
Technology Solutions
18
6 Setup and Programming
6.1 Setup Mode
6.1.1 Mode Changes
•
Press the MENU key for RUN, SETUP, TEST selections.
•
RUN is the normal operating mode for the instrument.
•
SETUP offers various sub-menus used for instrument setup.
•
TEST provides various sub-menus to test, calibrate and system start-up.
6.1.2 Submenu GROUP NAVIGATION
•
When in SETUP or TEST mode, use the UP and DOWN arrow keys to browse up and down
through the Sub-Menu groupings.
•
Press the ENTER key to enter a desired setup or test Sub-Menu group.
6.1.3 Item Selection
•
The unit will frequently provide many options for a particular topic during setup.
•
The topic prompt appears on the top line of the display.
•
The options are displayed on the display's lower line.
•
Press the key next to the option you want to choose an item.
•
The selected option will blink.
•
Press the ENTER key to accept the selected choice.
6.1.4 Numeric Entry
•
Numerical values are entered using the keys labeled "0 - 9", "–", ".", CLEAR, and ENTER.
•
A leading 0 will assume that you intend to enter a minus "–" sign.
•
Press the CLEAR key to clear the current value and to enable editing.
6.1.5 Text Character Entry
•
The user must insert text characters for some configuration elements (e.g., Descriptors,
Units Label).
•
Press CLEAR to enable editing.
•
The UP and DOWN arrow keys are used to scroll through the available character sets for
each character.
•
Press the ENTER key to accept the character and advance to the next character.
6.2 EZ Setup
•
The EZ Setup method allows you to configure the unit for the most regularly utilized
instrument functions quickly and easily.
•
This configuration implies you are measured Volumetric Flow with a DC Pulsing flow sensor
at a high level. Many functions are automatically set in EZ Setup mode.
•
This may cause any previously programmed information to be lost or reset.