www.tek-trol.com
3
1
Safety Instructions
1.1
Intended Use
Tek-Bar 3120B is a Exp Absolute/Gauge Pressure Transmitter used for pressure and level measurement
of steam, liquids and Gasses.
The manufacturer is not liable for damage caused by improper or non-designated use.
1.2
Certifications
Tek-Bar 3120B has CE, CSA approval (Class I Div. I)
1.3
Safety Instructions from the Manufacturer
1.3.1
Disclaimer
The manufacturer will not be held accountable for any damage that happens by using its product,
including, but not limited to direct, indirect, or incidental and consequential damages.
Any product purchased from the manufacturer is warranted in accordance with the relevant product
documentation and our Terms and Conditions of Sale.
The manufacturer has the right to modify the content of this document, including the disclaimer, at
any time for any reason without prior notice, and will not be answerable in any way for the possible
consequence of such changes.
1.3.2
Product Liability and Warranty
The operator shall bear authority for the suitability of the device for the specific application. The
manufacturer accepts no liability for the consequences of misuse by the operator. Wrong installation
or operation of the devices (systems) will cause the warranty to be void. The respective Terms and
Conditions of Sale, which forms the basis for the sales contract shall also apply.
1.3.3
Information Concerning the Documentation
To prevent any injury to the operator or damage to the device it is essential to read the information
in this document and the applicable national standard safety instructions. This operating manual
contain all the information that is required in various stages, such as product identification, incoming
acceptance and storage, mounting, connection, operation and commissioning, troubleshooting,
maintenance, and disposal.
1.4
Safety Precautions
You must read these instructions carefully prior to installing and commissioning the device. These
instructions are an important part of the product and must be kept for future reference. Only by
observing these instructions, optimum protection of both personnel and the environment, as well as
safe and fault-free operation of the device can be ensured.
For additional information that are not discussed in this manual, contact the manufacturer.
