page 5
TYPICAL INSTALLATION
WALL STUDS
MOUNTING PLATE
Example: 2x10 lumber
Lag bolt, lock washer,
and flat washer
4X
4X
4X
Machine bolt, two flat
washers, lock washer,
and nut
Machine bolt, lock washer,
flat washer, and anchor
TYPICAL FASTENERS AND HARDWARE COMBINATIONS
WOOD
METAL
MASONRY
INSTALLATION
Use included mounting
template to mark and drill the
hole locations.
MOUNTING TEMPLA
TE
Temporarily install the upper
fasteners leaving a 1/4" gap to
accommodate thickness of base.
1/4"
GAP
1.
2.
3.
4.
Guide base plate key holes over
the preinstalled fasteners.
Keep hose reel supported
at all times until all fasteners
are tight.
Install the lower fasteners
and tighten.
Remove the upper fasteners, and
reinstall with appropriate washers
and tighten all fasteners.
Keep hose reel supported
at all times until all fasteners
are tight.
KEYHOLE
SLOTS
