Tekon PA160410220, Руководство по эксплуатации продукта, Страница: 34 / 46

DUOS IoT GATEWAY Product Manual
34
Figure 24 - DHCP deactivation
NOTE: for the IP assignment to our device to be done automatically by the network server
to which it is connected via the ethernet port, must keep validation in the DHCP parameter
checkbox. If the IP assignment occurs automatically, the parameter value will be “Enabled”.
If you choose to manually assign the IP, the value returned will be “Disabled”.
4.5.2 NTP
The acronym NTP stands for Network Time Protocol, which assumes the role of establishing
the time window that the server is using as a reference associated with recording the date and
time of all processes.
You can choose to use the time server configured on your network server or choose to use an
external server.
Figure 25 - Network Time server configuration
You can enter an address identical to the one in the image above or you can include a time
server using its IP address. At the end of the configuration, you can test the connection to the
time server using the
Test
button.
If the connection fails, the error message Invalid NTP will be displayed. If the defined server
is valid, the message displayed will be Valid NTP .