AMIBIOS Setup 15-6
15.04 SETUP WINDOW
15.04.1 STANDARD SETUP
This part of the setup allows you to set the time, date, hard disk type, types of floppy
drives.
The Standard Setup screen displays seven icons as follows:
Pri Master
Sec Master
Pri Slave
Sec Slave
There can be two IDE controllers defined on the TEK933 board (Primary or
Secondary), each can have two disks: Master Disk (bootable) or Slave Disk. Select one
of these hard disk drive icons. Select the option TYPE: an options list displays all valid
disk drive types. Select the correct type and press ENTER. If the hard disk drive is an
IDE drive, the AUTO option automatically finds all of the IDE drive parameters for that
hard disk.
The displayed parameters are stored in the user defined drive TYPE “USER”.
It is possible that the parameters provided do not match the ones found in
your drive's literature. This should not be considered an error. As matter of
fact, different combinations of heads, cylinders and sectors that match the
disk's capacity in MB will work when formatting an IDE hard drive. But if the
disk is already formatted, it is not possible to use different parameters than the
ones that were used when the drive was originally formatted.
You can also enter the hard disk drive parameters (Cylinders, Heads, Write
Precompensation, Sectors, and Capacity) by selecting the option USER of the TYPE
options list.
Date/Time
The current values for each category are displayed. Enter new values through the
keyboard.
Floppy A
Floppy B
The settings are: 360KB 5¼ inch, 1.2MB 5¼ inch, 720KB 3½ inch, 1.44MB 3½ inch,
2.88MB 3½ inch, or not installed.
Содержание PCI-993
