Tekno Point KIT BT IDRA, Руководство по установке

Страница: 18 / 32

ENGLISH
TEKNO POINT ITALIA S.R.L. - VIA DELL’ARTIGIANATO 5 - 30020 MARCON (VE) – ITALY
COMMERCIALE@TEKNOPOINT.COM – WWW.TEKNOPOINT.COM
MI_KIT BT IDRA_Ita_Eng_Fra_Deu_TP/Rev.00/Data 03.06.2020
16
Electring wiring
1. Remove the cover of the electric box , link the dedicated connector of the KIT BT IDRA and fix the
earth wire on the metallic carpentry of the Condensing unit.
2. Open the side panel of the condensing unit to reach the main board. Connect the bridge in the box
to the dedicated yellow connector.
3. Close the side panel and the cover of the electric box before starting the unit..
ATTENTION:
Do not use any power supply with different connector from the one provided, otherwise there could be
malfunctioning or damage of the KIT BT IDRA.