SEAT HEIGHT ADJUSTMENT
SEAT DEPTH ADJUSTMENT
LUMBAR HEIGHT ADJUSTMENT
BACK TILT LOCK ADJUSTMENT
TILT TENSION ADJUSTMENT
ARM WIDTH ADJUSTMENT
To adjust the angle of reclination,
pull the lever up to unlock the back
and leave the chair in free-flow
mode. Recline to the desired
position and push the lever down
to lock the back in place.
To adjust the lumbar height, grasp
both levers and slide them up or down
to the desired position. Not available
on Amicus General Use Chairs.
To adjust the seat depth, push the
lever down and simultaneously lift
your weight from the seat while
sliding the seat forward or
backward. Release the lever to lock
the seat in place. Not available on
Amicus General Use Chairs.
To raise the chair, lift the lever up
while lifting your weight from the
seat until you reach the desired level,
then release to lock in place. To
lower the chair, lift the lever up and
allow your weight to push the seat
down until you reach the desired
level, then release to lock in place.
Leaning back, determine if the
resistance
of
the
chair
is
comfortable. For less resistance, pull
tension adjustment lever out and
turn it counterclockwise. For greater
resistance, turn the lever clockwise.
To adjust the width of each arm,
push the lever down to release the
arm lock. Slide the arm inward or
outward to the desired position.
Push the lever up to lock the arm
in place.
amicus adjustment features & instructions
