Teknatool nova ORION 55250, Руководство по эксплуатации

Страница: 21 / 38

21
128-1019-004
After pressing the speed control knob on the selected
favourite speed, the screen will change to enter the
new lathe speed to assign.
Both <F> key and speed control knobs can be used to
adjust the new speed value.
Key Effect
F1 +100rpm
F2 -100rpm
F3 +5rpm
F4 -5rpm
Press the speed control knob to set the new favourite
speed value.
Using the lathe speed chart
Access the speed chart function from the menu by
pressing the <Menu> key on the lathe home screen
.
“Speed Chart” will the first option that will appear on
the lathe menu screen.
Press in the speed control knob to enter the speed
chart function.
Use the speed control knob to select the desired type
of cut; Finishing/ Shaping cut or Rough cut.
Press in the speed control knob to enter the selected
menu of the selected type of cut.