POP UP ZOMBIE
INSTALLATION AND OPERATING INSTRUCTIONS
KEEP ALL PLASTIC AND WIRE PARTS AWAY FROM CHILDREN
PARTS
1. HEAD AND CLOTHES
2. UPPER POLE
3. BOTTOM POLE
4. BASE
5. TOMBSTONE (2 HALVES)
6. TOMBSTONE SPIKES (3)
7. TOMBSTONE FOOT SPIKES (2)
Attach UPPER POLE TO HEAD AND CLOTHES. (Match A to A)
Twist to lock.
Insert BOTTOM POLE into BASE. (Match C to C)
Twist to lock.
Insert HEAD AND CLOTHES attached to UPPER POLE into BOTTOM POLE.
(Match B to B)
Insert 2 TOMBSTONE FOOT SPIKES into the bottom of the bottom half of TOMBSTONE.
Insert 3 TOMBSTONE SPIKES into top of top half of
TOMBSTONE, placing the long spike in the center, and
attach top half of TOMBSTONE.
1.
2.
3.
4.
5.
PAGE 1
1.
2.
3.
4.
5.
6.
7.
Pull the round button located on the UPPER POLE. While holding the
round button, extend the top of the UPPER POLE. (See illustration 1a)
1
1a
Connect two wires located under clothing and insert wires into BASE, (Match E to E)
and (Match D to D).
A
A
2
3
C
C
4
B
B
B
5
E
E
D
D
6a
6
7
6.
7.
8.
TOMBSTONE ASSEMBLY
Place TOMBSTONE 3 inches in front of BASE.
Note: For sheltered outdoor use, insert TOMBSTONE FOOT SPIKES as seen
in illustration 6a. Use caution when inserting the plastic spikes into the
ground, as they may break easily. We recommend
puncturing a hole into the ground BEFORE inserting
plastic spikes. Use a screwdriver or similar tool to
puncture ground.
Note: Once UPPER POLE is inserted into BOTTOM POLE, it cannot be removed.
*WARNING*
SPRING LOADED ACTION MAY
CAUSE INJURY! USE CAUTION
WHEN ASSEMBLING AND FOLLOW
INSTRUCTIONS CAREFULLY
