Tekelec Business Analog Telephone, Руководство пользователя

Страница: 53 / 145

42 Telephone Features Business Analog Telephone User Guide
620-05600190
When the phone with Auto Enable When Phone OOS checked returns to service
after the outage, Remote Phone is not disabled. Both the phone and Remote
Phone will ring for each incoming call. The user must disable remote mode using
the Web Portal or by pressing the
Remote button on the phone.
Deactivating Remote Phone via Web Portal
To completely deactivate the Remote Phone mode, you must uncheck the Enable
Remote User checkbox on the Web Portal or press the Remote button on your IP
phone.
If you just hang up the remote phone, it will disconnect the call, but Remote Phone
mode will still be enabled. The next call coming in to your IP phone will ring the
remote phone.
Feature Interaction: Remote Phone with Find-Me
The Remote Phone mode works in conjunction with the Find-Me function that will
transfer the call to each phone you have listed in your Find-Me list. When your IP
phone is in Remote Phone mode, and you have Find-Me set up, first the call will try
ringing the remote phone. If it is not answered, the Find-Me function takes over and
will try the next numbers in your Find-Me list.
If you set up Remote Phone from the Web Portal, and you do not answer so Find-
Me takes over, then Remote Phone mode will remain enabled and the next call
coming in will also ring the remote phone.
If you set up Remote Phone using the direct inward dial number, then when you do
not answer the remote phone, the Remote Phone mode will be disabled. Any
subsequent calls will ring your IP phone.
Selective Call Forward
Selective Call Forward allows you to program your phone to send calls from a list
of telephone numbers to another telephone number. All calls from phones on the
list go to the same destination, which can be changed at any time.
To use this feature, you designate the forward destination and manage a list of
telephone numbers (internal or external) that are forwarded to that number when a
call with that caller ID appears at your telephone.
Selective Call Forward is managed through a menu of commands activated by
pressing digits on the phone keypad. The commands are:
•
1 - Enable/disable feature
•
2 - Enter the forward (destination) number
•
3 - ID (forward destination number)
•
4 - Add members (to list to be forwarded)